180g XTC-3D

$27.00

Availability: In stock

XTC-3D is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes.
Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). – 1oz covers 100+ square inches 

Mix Ratio: 
By Volume – 2 Parts A to 1 Part B
By Weight – 100 Parts A to 42 Parts B

XTC-3D cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colours and metal effects is also possible and easy to do.

XTC-3D fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. Coat any 3D printed surface with XTC-3D. It can be applied to both SLA and SLS prints. It also works with PLA, ABS, Laywoo, Powder Printed parts and other rigid media. It can also be used to coat EPS, EODM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D does NOT contain VOC’s. phthalates or phosphates.
XTC-3D comes as a full KIT containing Part A and Part B. 6.4oz unit = 0.18kg kit.